Balance Beam Brake System 911 RSR – ST with Floor Plate

The balance beam brake system is supplied complete with pedals and the appropriate piece of floor plate and enables the precise distribution of the braking force between the front and rear axles by adjusting the balance beam.This enables maximum braking performance of the entire vehicle.The use of brake calipers that have different piston diameters or different brake pad surfaces requires a different setting of the braking force distribution.Different diameters of the brake discs also change the braking force of the respective axle, so that a balance beam brake system should be installed for any modifications to the brake system.Last but not least, a “soft” brake pedal, which inevitably occurs when the piston diameter on the brake caliper is increased, is completely prevented by installing a balance beam brake system, which, due to its design, works with two master brake cylinders mounted in parallel.The brake system also requires a mounting kit, which includes two brake fluid containers.Note: for this system, which was used at the factory in the 2.8 RSR and 3.0 RSR, the floor plate must be additionally changed, but this is included in the scope of delivery.If you do not want to make any changes to the body or originality is not that important to you, use the balance beam brake system of the 911 SC RS (item number 1.07300B).This can be easily installed without changing the bodywork.The pedals are suitable for all 914s, as well as for all 911 model years ’65 – ’77 without a brake booster, as well as for all 911s from ’78 to ’89 if the brake booster is omitted.